Blisstech GSM GPRS WiFi GPS Tracker Magnet - BlisstechStore.com
Blisstech GSM GPRS WiFi GPS Tracker Magnet

Blisstech GSM GPRS WiFi GPS Tracker Magnet

$147.99

The very first GSM GPRS WiFi GPS Tracker with 5000mAh rechargeable battery and a powerful magnet + SD Card Data Logger & Wifi Locating Signal. This is the ultimate tracker straight out of a James Bond movie.

Note: As you may know already, almost all GPS trackers are only able to track using nearby GSM towers. However, this GPS tracker is able to also use automated public WiFi tracking (no wifi passwords needed), which means it can always track in very high detail. In most countries within Europe as well as the USA, it can reply the name of the building directly using WiFi tracking.

 Main Features
1. Super Magnet built-in  
2. Built-in Power button to active device quickly 
3. 5000mAh Lithium-ion battery with industry standard 
4. Instant call alert for anti-theft when vehicle movement is detected
5. Drop sensor alert build-in
  • GSM 850/900/1800/1900 Quad-band 
  • Build-in GPS/GPRS and Antenna  
  • Web based Real-time tracking and replay or locate via SMS 
  • Built-in watchdog CPU to avoid system crash 
  • Built-in motion sensor to save power 
  • Remote Bug Monitoring function with DSP within five meters of effective  
  • Weather-Proof Design 

 

How to get started:

Step 1.  Get an active SIM card with both GSM SMS and GPRS data service.

Make sure the SIM card can send SMS and have GPRS function;

Step 2.  Insert the SIM card, and make sure install the over properly.

Because only when you install the cover, then the screw will be fit strongly and the device will have power supply.

Step 3.  Check Installation.

Call the tracker SIM card, and see whether it's with signal. If it can ring, but won't pick up the phone, it means the SIM card is with signal, and you can go next.

Step 4.  Set the APN.

 It's very important. Eg, your APN is internet, and no login user and password, then you just need send :*APN*internet* (don't allow cap letter here!)(it will reply to you whenever the APN command is wrong or correct. However, only when you set the right APN, it can be combined with our web platform. Therefore, if you didn't get any reply, then please kindly check whether your SIM card is with active GPRS or GSM SMS service, or whether your sim card is fit well.

Step 5.  Set the master number.

It's very important also. The right command is:*master*123456*+45XXXX*,eg, if you use your own mobile phone is 004511111111,thenthe master command will be: *master*123456*+4511111111*

Step 6.  Login into web tracking platform.

After set the right apn and master number, then you can go to our web platform: www.miitown.com input the master number and password to login in.

Please pay attention, default password is 123456, user start with country code 00.Eg,00451111111,not +4511111111 .At this step, if you set APN correctly,then you could see your gps device location now.

AT the same time, you can send *locateaddress* and your phone will receive the detailed address include street name.

 

 Free Web Tracking Platform Preview

VJOY-GPS-Software-1VJOY-GPS-Software-2VJOY-GPS-Software-3

Frequently Asked Questions

1)   Can your gps trackers work in our country
Answer: As long as your country has regular 2G GSM network. If you use 3G SIM card or 4G SIM card, before testing,make sure it has 2G GSM service.
2)  When I send SMS to it, it does not reply GPS location, only LBS location.
Answer: your gps tracker is indoor? Please make sure it’s outdoor. No heavy rain, then the signal is good.Still LBS location?Then, pls send *0000* to check its statas, or try to on the routetrack or cheakm function.
3)  Under *sleepv* mode, does the gps and gsm module work still?
Answer: No. Both GSM and GPS don’t work. When you send sms or call the device, no answer at all. Only when the device detect motion, it will wake up and send you the location.
4)  Under *sleep*3*,does the gps and gsm module work?
Answer: No. Both GSM and GPS don’t work. When you send sms or call the device, no answer at all. It only wake up after 3 hours later.
5)  Can I wake it up if under deep sleeping mode eg: *sleepv* or *sleep*3*
Answer: No, it can’t wake up remotely. *sleepv* only wake up when it detect motion; *sleep*3* only wake up after 3 hours. Can’t wake the GPS trackers by sms remotely. However, if you press the “on” button for 10 times by hand to wake the device up.
6)   When I set sleeping mode for my deivce, then power off the device, and power on again , can it remember the old setting?
Answer: Yes, it can. However, it will stay “ waking up” for 12 minutes because it treat you “power on/off” as motion. After 12 minutes, it will login into sleep mode again.
7)  What does “ route track” command mean?
Answer: routetrack default setting is: collecting interval = 10seconds, and uploading interval=60seconds. IF you want to set the routetrack function detailed,please kindly use rsampling and rupload command.
8)  What’s the difference between “routetrack” and “rsampling” / “rupload”
Answer: routetrack is a rough setting with collecting interval = 10seconds, and uploading interval=60seconds. However, rsampling is used to set the detailed collecting interval, and rupload is used to set the detailed upload interval.
9) T16 bike lamp looks bad because it will attractive the bike theft notice, we want it to be a faulty lamp always, Can I ?
Answer: yes,just press the “on/off” button for 3 times to turn off the light always.
10)  Does your device has the identifies function for its insertedSIM card?
Answer: yes, when the SIM card is moved out, and insert a new SIM card, it will send a alert to the master controller number: mobile 000000000000000(device SN number) has changed to this phone number.
11)  Hong long can the battery last?
Answer: pls kindly check our battery testing report here. All of our device are using the same battery, the only different is the capacity.
12)  What’s the battery current?
Answer: when gps tracker is under standby mode, its current is 2-3mA;
When GPS is working, the current is 50-80mA;
When it’s uploading data, the current is 100-200mA.
13)  Can I combine your gps trackers on our own web tracking platform?
Answer: yes, of course, if you need, pls kindly contact with us to ask for our hardware communication protocol.
14)  What’s the format to transfer the default IP from your server to our server?
Answer: the format sample is as below:
If your server is:
IP: 89.207.145.86
Port: 2045
Then the command is:
*setip*89*207*145*86*2045*
Please pay attention: once you transfer the default server from ours to your own, it can’t be changed back again. It’s singe travel change.
Don't hesitate to contact us if you need any help setting up the tracker!
Please note that all these instructions are included with the product.